Dimensions Guide

4-1/8"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower:
Technical Information
All product dimensions are nominal.
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
3-Wall AlcoveInstallation:
RightDrain location:
51-3/8" x 21" (1305 mm x 533 mm)Basin area, bottom:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
64-1/2" x 30-1/2" (1638 mm x 775 mm)Basin area, top:
115 lbs (52.2 kg)Weight:
42 lbs/ft² (205.1 kg/m²)Minimum floor load:
ADA compliant when installed to the specific
requirements of these regulations.
15" (381 mm)Water depth:
72 gal (272.5 L)Water capacity:
Blower: 120 V, 10 A, 60 HzElectrical component
rating:
1-9/16" (40 mm)Minimum flat for door:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-25-2018 01:59
Archer
®
6' BubbleMassage
™
Bath
K-1124-GRA