Specification

K-1601 (Continued) Bath footstop ❑ 0 ❑ Other_____
K-9529 Removable bath seat ❑ 0
Technical Information
Fixture*: *Approx. measurements for comparison only.
Basin area,
bottom
51-3/8″ (1305 mm) x 21″ (533 mm)
Basin area, top 64-1/2″ (1638 mm) x 30-1/2″
(775 mm)
Weight 81 lbs (36.7 kg)
Water depth 15″ (381 mm) to overflow
Capacity 72 gal (272.5 L) to overflow
Drop-in cutout 70-1/2″ (1791 mm) x 34-1/2″ (876 mm)
Amplifier/control: Power per channel V Hz
15 (rms) W 120 50/60z
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD): Amplifier/control, 120 V, 15 A,
50/60 Hz
Installation Notes
Install this product according to the installation guide.
Control amplifier fits 16″ (406 mm) center studs. A grounded
outlet within the wall framing must be within 24″ (610 mm) of
the planned control amplifier.
Cables are included, 25’ (7.6 m) each.
Floor support under this product must provide for a minimum
of 39 lbs/square foot (190.4 kg/square meter) loading.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
Ensure that the bath, user interface, amplifier, and
transducers are functional before completing the installation.
18"
(457 mm)
11-1/4"
(286 mm)
1-1/2"
(38 mm)
Drop-in Rim
Detail
No change in measurements if connected
with drain illustrated. (K-7272)
17-1/2"
(445 mm)
1-1/2"
(38 mm)
4-1/8"
(105 mm)
1-1/2"
Bath Drain
19"
(483 mm)
2-1/2"
(64 mm)
3/4" (19 mm)
72" (1829 mm)
36" (914 mm)
*Recommended User
Interface Location
*10"
(254 mm)
*24"
(610 mm)
Control Amplifier
User Interface
3-3/16"
(81 mm)
11-3/4"
(298 mm)
14-1/2"
(368 mm)
7/8"
(22 mm)
3-1/2"
(89 mm)
5-5/8"
(143 mm)
Lumbar
Angle 42˚
Product Diagram
ARCHER
®
ARCHER
®
6’ VIBRACOUSTIC
®
DROP-IN BATH
Page2of2
1201715-4-
A