Specification

K-9529 (Continued) Removable bath seat ❑ 0
K-1491 Bath pillow ❑ 0 ❑ Other_____
K-1601 Bath footstop ❑ 0 ❑ Other_____
Technical Information
Fixture*:
Bathing well:
Basin area, bottom 51-3/8″ (1305 mm) x 21″ (533 mm)
Basin area, top 64-1/2″ (1638 mm) x 30-1/2″
(775 mm)
Weight 91 lbs (41.3 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 72 gal (272.5 L)
*Approximate measurements for comparison only.
Amplifier/control: Power per channel
(rms) W
VHz
15 120 50/60z
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Amplifier/control: 120 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Control amplifier fits 16″ (406 mm) center studs. A grounded
outlet within the wall framing must be within 24″ (610 mm) of
the control amplifier. Cables are included, 25’ (7.6 m) each.
Floor support under this product must provide for a minimum
of 40 lbs/square foot (195.3 kg/square meter) loading.
Ensure that the interface, amplifier, and transducers are
functional before completing the installation.
5-5/8"
(143 mm)
3-1/2"
(89 mm)
7/8"
(22 mm)
14-1/2"
(368 mm)
11-3/4"
(298 mm)
3-3/16"
(81 mm)
User Interface
Control Amplifier
*Recommended User
Interface Location
*24"
(610 mm)
*10"
(254 mm)
1-1/4"
(32 mm)
4-1/8"
(105 mm)
1-1/2"
Bath Drain
19"
(483 mm)
2-1/2"
(64 mm)
11-1/4"
(286 mm)
18"
(457 mm)
No change in measurements if connected
with drain illustrated. (K-7272)
3/4" (19 mm)
72" (1829 mm)
36" (914 mm)
1-1/4"
(32 mm)
Integral Flange
Detail
1/2" (13 mm) R.
Lumbar
Angle 42˚
20-1/4"
(514 mm)
Product Diagram
ARCHER
®
ARCHER
®
6’ VIBRACOUSTIC
®
BATH WITH INTEGRAL APRON
Page2of2
1201716-4-
A