Installation Guide

Conecte los cables eléctricos (cont.)
Agrupe los cables neutros con una tuerca de plástico para cables y envuelva con
cinta aislante.
Conecte el cable vivo (negro) de la unidad al cable vivo (normalmente negro) de
la caja eléctrica.
Agrupe los cables vivos con una tuerca de plástico para cables y envuelva con
cinta aislante.
Verifique que todas las tuercas de plástico para cables estén bien apretadas y no
queden hilos al descubierto.
Coloque con cuidado las conexiones de cables dentro de la caja eléctrica.
Coloque la placa posterior de la unidad sobre la placa de montaje.
Coloque con cuidado las conexiones de cables detrás de la placa posterior.
3. Install the Wall Sconce
NOTE: The illustration may differ from the actual product. The instructions still
apply.
Secure the fixture to the mounting plate with the mounting knobs. The fixture
should be flush against the finished wall.
Remove the screw collar(s) from the threaded socket(s) of the fixture.
Position the shade(s) on the threaded socket(s).
Hand tighten the screw collar onto the threaded socket to secure the shade(s) in
place.
Insert the bulb(s) into the fixture.
Turn on the main electrical supply from the main fuse or circuit breaker.
Check for proper operation.
Mounting Knobs
Poignées de fixation
Perillas de montaje
Shade
Verre
Pantalla
Screw Collar
Collier vis
Collarín de rosca
Threaded Socket
Douille filetée
Casquillo roscado
Finished Wall
Mur fini
Pared acabada
Mounting Plate
Plaque de fixation
Placa de montaje
Kohler Co. 7 1075808-2-C