How to Guide

Product Information
Applicable products:
Bath whirlpool – drop-in K-1148
Fixture*:
Bathing well:
Basin area, bottom 53″ (1346 mm) x 26″ (660 mm)
Basin area, top 65″ (1651 mm) x 34″ (864 mm)
Weight 74-1/4 lbs (33.7 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 78 gal (295.3 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Included components:
Cut-out template 114861-7
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
36 lbs/square foot (173 kg/square meter) loading.
This fixture conforms to ANSI Standard Z124.1.2. All
dimensions are nominal.
No change in measurements with
drain shown. (K-11677 or K-11677-M)
35" (889 mm)
30" (762 mm)
20" (508 mm)
10"
(254 mm)
12-1/2"
(318 mm)
17"
(432 mm)
19-1/2"
(495 mm)
20-1/2"
(521 mm)
1-1/2"
(38 mm)
Drop-In
Rim Detail
Pump/Control Access
20" (508 mm) W x
15" (381 mm) H Min
19-3/4"
(502 mm)
2-1/2"
(64 mm)
1-1/2"
(38 mm)
4-7/8"
(124 mm)
36" (914 mm)
72" (1829 mm)
1-1/2" OD
42-1/8" (1070 mm)
2-7/8"
(73 mm)
3" (76 mm)
1/4" (6 mm)
Cut-Out Detail
Symmetrical About C
L
14"
(356 mm)
Roughing-In
K-1148
PROFLEX
®
7242 OVAL
BATH WHIRLPOOL
PROFLEX
®
7242 OVAL BATH WHIRLPOOL
1013035-1-
E