Specification

Technical Information
Fixture*:
Bathing well:
Basin area 45″ (1143 mm) x 22″ (559 mm)
Top area 54″ (1372 mm) x 25″ (635 mm)
Bath with apron
Weight 91 lbs (41.3 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 60 gal (227.1 L)
*Approximate measurements for comparison only.
Amplifier/control: Power per channel
(rms) W
VHz
15 120 50/60z
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Amplifier/control: 120 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Control amplifier fits 16″ (406 mm) center studs.
A grounded outlet within the wall framing must be within 24″
(610 mm) of the planned control amplifier.
Cables are included, 25’ (7.6 m) each.
Floor support under bath must provide for a minimum of
45 lbs/square foot (219.7 kg/square meter) loading.
Ensure that the bath, user interface, amplifier, and
transducers are functional before completing the installation.
1-1/4"
(32 mm)
1-1/2"
Bath Drain
Integral Flange Detail
No change in measurements if connected
with drain illustrated. (K-11677)
1/2" (13 mm) R.
1-1/4"
(32 mm)
32" (813 mm)
20"
(508 mm)
3-1/2"
(89 mm)
9" (229 mm)
15-1/2"
(394 mm)
2-1/2" (64 mm)
1" (25 mm)
60" (1524 mm)
*Recommended User
Interface Location
Control Amplifier
User Interface
3-3/16"
(81 mm)
11-3/4"
(298 mm)
14-1/2"
(368 mm)
7/8"
(22 mm)
3-1/2"
(89 mm)
5-5/8"
(143 mm)
*10"
(254 mm)
*24"
(610 mm)
Lumbar
Angle 34˚
21-1/4"
(540 mm)
Product Diagram
BANCROFT
®
BANCROFT
®
5’ VIBRACOUSTIC
®
BATH WITH INTEGRAL APRON
Page2of2
1201717-4-
A