How to Guide

Product Information
Applicable product:
Bath whirlpool – drop-in, custom pump K-1154-CC
Fixture*:
Basin area:
Bathing well 44″ (1118mm)x36″ (914 mm)
Top area 56″ (1422 mm) x 43″ (1092 mm)
Weight 65 lbs (29.5 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 76 gal (288 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
37 lbs/square foot (175 kg/square meter) loading.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
3" (76 mm)
2-7/8" (73 mm)
1-1/2" OD
26" (660 mm)
2-5/8" (67 mm)
1/2" (13 mm)
Cut-Out Detail
25" (635 mm)
52-1/2"
(1334 mm)
135˚
56-1/2"
(1435 mm)
30-3/4" (781 mm)
30-3/4"
(781 mm)
54"
(1372 mm)
26" (660 mm)
4-7/8"
(124 mm)
54" (1372 mm)
Pump/Control
Access
20" (508 mm) W
x 15" (381 mm) H
Pump/Control Access
20" (508 mm) W x
15" (381 mm) H
39-3/4" (1010 mm)
Drop-In Rim Detail
1-1/2"
(38 mm)
20-1/2"
(521 mm)
13"
(330 mm)
No change in measurements if connected
with drain illustrated. (K-7161-AF or K-7161M-AF)
Roughing-In
K-1154-CC
PROFLEX
®
5454
BATH WHIRLPOOL
PROFLEX
®
5454 BATH WHIRLPOOL
1010678-1-
E