Dimensions Guide

Optional Accessories
K-9696 Jet trim kit (metal finishes) ❑ CP ❑ PB ❑ Other_____
Technical Information
Fixture*:
Basin area:
Bathing well 55″ (1397 mm) x 21″ (533 mm)
Top area 65″ (1651 mm) x 26″ (660 mm)
Weight 66 lbs (29.9 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 72 gal (272.5 L)
* Approximate measurements for comparison only.
Drop-in
cut-out
70-1/2″ (1791 mm) x 34-1/2″ (876 mm)
Pump: V Hz A
1-speed 120 60 7.5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
38 lbs/square foot (188 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
18"
(457 mm)
1"
(25 mm)
2-1/2"
(64 mm)
72" (1829 mm)
2-7/8" (73 mm)
3" (76 mm)
1/4" (6 mm)
20-1/8"
(511 mm)
18-5/8"
(473 mm)
1-1/2" OD
36" (914 mm)
1-1/4"
(32 mm)
1-1/2"
(38 mm)
Tile Flange
Detail
Drop-in
Rim Detail
No change in measurements if connected with drain
illustrated. (K-11677 or K-11677M)
Pump/Control Access
(If Apron Is Not Used)
20" (508 mm) W x 15" (381 mm) H
8-1/2"
(216 mm)
Product Diagram
PROFLEX
®
7236
PROFLEX
®
7236 BATH WHIRLPOOL
Page2of2
1012987-4-
E