Dimensions Guide

Technical Information
Fixture*:
Bathing well:
Basin area, bottom 46″ (116.8 cm) x 30″ (76.2 cm)
Basin area, top 57″ (144.8 cm) x 34″ (86.4 cm)
Weight 130 lbs (59 kg)
To overflow:
Water depth 16″ (40.6 cm)
Capacity 95 gal (359.6 L)
* Approximate measurements for comparison only.
Included component:
Cut-out template 1043292-7
Blower
motor:
Heater V Hz A
300 W 220-240 50/60 3
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/control 220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
This bath is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
A blower motor/control access panel is required.
Floor support under the bath must provide for a minimum of
50 lbs/square foot (242 kg/square meter) loading.
2-1/4"
(5.7 cm)
1-1/2" OD
2-3/4"
(7 cm)
1" (2.5 cm)
2-7/8"
(7.3 cm)
No change in measurements if connected with
drain illustrated.
(K-7161-AF or K-7161M-AF)
2"
(5.1 cm)
22"
(55.9 cm)
Blower/Control Access
34" (86.4 cm) W x 15"
(38.1 cm) H Max
9" (22.9 cm)
41-3/4" (106 cm)
65-7/8" (167.3 cm)
20-7/8"
(53 cm)
Product Diagram
BANCROFT
®
BANCROFT
®
5.5’ BUBBLEMASSAGETM BATH
Page2of2
1043961-4-
B