How to Guide

Product Information
Applicable products:
Bath whirlpool – drop-in K-1160
Bath whirlpool – integral tile flange K-1160-F
Fixture*:
Basin area:
Bathing well 52” (1321 mm) x 38-3/4” (984 mm)
Top area 61” (1549 mm) x 46-1/4” (1175 mm)
Weight 127 lbs (57.6 kg)
To overflow:
Water depth 15” (381 mm)
Capacity 96 gal (363.6 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Minimum access panel
(required):
20″ (508 mm) W x
15″ (381 mm) H
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24”
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
39 lbs/square foot (189 kg/square meter) loading.
Fixtures conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
27-1/2" (699 mm)
135˚
Ø 1-1/2"
3" (76 mm)
60" (1524 mm)
19-1/2"
(495 mm)
63"
(1600 mm)
35"
(889 mm)
35"
(889 mm)
60"
(1524 mm)
29" (737 mm)
29"
(737 mm)
Pump/Control
Access
4-7/8"
(124 mm)
13-1/8"
(333 mm)
43-3/4"
(1111 mm)
21"
(533 mm)
1/2" (13 mm)
2-7/8"
(73 mm)
2-7/8" (73 mm)
Drop-In Rim Style
Cut-Out Detail
57-1/2"
(1461 mm)
Tile Flange
Detail
Drop-In Rim
Detail
1-1/4"
(32 mm)
1-1/2"
(38 mm)
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
Roughing-In
K-1160, K-1160-F
TERCET
®
BATH WHIRLPOOL
TERCET
®
BATH WHIRLPOOL
1041915-1-
D