Installation Guide

5. Install Electrical Connections
WARNING: Risk of electric shock. Disconnect the power before performing the following
procedures.
NOTICE: A qualified electrician must install a dedicated GFCI- or RCD-protected, 120 V, 15 A grounded
outlet.
Install a 120 V, 15 A grounded outlet within the wall framing and within 24″ (610 mm) of the
planned control amplifier location. Route the wires through conduit for this outlet installation.
Control
Amplifier
120 V, 15 A
Grounded Outlet
24" (610 mm)
Maximum
Ethernet Connector
Conduit
1297608-2-B 12 Kohler Co.