Installation Guide

5. Plunger Assembly Adjustment
Remove the hood from the overflow ell.
Remove the pin on the plunger assembly from the hood.
Remove the plunger assembly from the overflow ell.
Remove the pin from the link, then reinsert the pin at the proper height.
Reinsert the plunger assembly into the overflow ell.
Reinstall the hood to the overflow ell.
Verify proper operation of the lever.
Réglage de l’ensemble du plongeur
Retirer le couvercle du coude de trop plein.
Retirer la goupille située sur le plongeur à partir du couvercle.
Retirer le plongeur du coude de trop plein.
Retirer la goupille du connecteur, puis réinsérer la goupille à la hauteur adéquate.
Réinsérer l’ensemble du plongeur dans le coude du trop-plein.
Réinstaller le couvercle sur le coude de trop plein.
Vérifier le bon fonctionnement du levier.
Pin
Tige
Clavija
Plunger Assembly
Ensemble de plongeur
Montaje del émbolo
1114757-2-A 14 Kohler Co.