Installation Guide

9. Install the Finished Wall
Thick Wall
NOTE: The plaster guard can be used as a guide for marking the
cutout.
Cut a 5-9/16″ (141 mm) hole in the wall material.
Install the finished wall material.
Leave the plaster guard in place at this time.
Finished Wall
*2-3/4" (70 mm) – 3-1/2" (89 mm)
Rough-In Depth
Plaster Guard
Ø 5-9/16"
(141 mm)
Ø 5-9/16"
(141 mm)
* Refer to the valve trim specification sheet
for roughing-in dimensions.
Kohler Co. 15 1128093-2-E