Installation Guide

Before You Begin (cont.)
Provide properly dimensioned framing.
Choose a fill spout which will provide adequate reach and a minimum 2″ (51 mm) air gap above
the bathing well rim of the overflowing bath. You may need to build up the deck material to obtain
adequate air space because the outer rim may be lower than the bathing well rim depending on the
specific area of the bath.
Follow local plumbing codes.
The bath must be filled with water through the bathing well, not the overflow channel.
If you plan to install a deck-mounted, hand-held shower, the diverter vacuum breaker must
maintain a minimum 1″ (25 mm) air gap above the bath rim.
When using the K-922 or K-923 Laminar Bath Spout with drip tray K-924, the distance from the
finished wall to the outside wall of overflow channel should not exceed 2″ (51 mm).
Kohler Co. reserves the right to make revisions in the design of products without notice, as specified
in the Price Book.
1019731-2-E 4 Kohler Co.