Installation Guide

2. Attach the Apron Frame
Remove the panel from the frame, then set the panel aside.
Insert the bottom of the frame under the rim of the bath/whirlpool.
Center and push the frame up until it contacts the underside of the rim.
Thread one wing nut and one flat washer onto the carriage bolt.
Insert the carriage bolt assembly into the upper center hole in the back of the frame.
Loosely assemble the second flat washer and wing nut to the carriage bolt from the front of the
frame. Do not tighten at this time.
Panel
Frame
Push
Frame
Up
Rim
Frame
Rim
Carriage
Bolt
Support
Structure
Flat
Washer
Wing
Nut
Frame
1011308-2-E 4 Kohler Co.