Installation Guide

116351-2-AA (-)
Copyright 1997 Kohler Co.

GILFORD VITREOUS CHINA
KITCHEN SINK
BEFORE YOU BEGIN
TOOLS AND MATERIALS REQUIRED
 Measuring tape
 Carpenters square
 Sealant
 Pencil
 Various carpentry tools
NOTES
With the exception of the support framing, the cabinet
designs illustrated below are intended as suggestions
only. Your specific installation requirements may vary
from those shown.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler Co. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
Fixture dimensions are nominal and conform to
tolerances in ASME Standard A112.19.2M.
All illustrations in this manual assume installation with a
standard, 24” countertop. Other countertop sizes may
also be used.
PRODUCT REQUIREMENTS
Due to the special nature of this installation, Kohler Co.
recommends that an experienced cabinet maker build the
new cabinet or modify an existing cabinet to achieve a
satisfactory installation.
To ensure proper fit of the sink in the cabinet, we suggest
you provide the cabinet maker with the actual sink that will
be installed.
A wood support frame must be constructed to support 300
lbs. Follow all framing instructions exactly.
INSTALLATION
DETERMINE CABINET DESIGN
Before proceeding, determine whether or not the sink will
be installed with the front apron exposed. Several basic
cabinet design options are shown for your convenience.
You may also use a design of your own.
The sink should either be set back against the finished
wall, or positioned so the sink front rim flange extends
2-3/4” from the front of the cabinet.
SINK BACK, EXPOSED APRON SINK BACK, ENCLOSED APRONSINK FORWARD, EXPOSED APRON