Installation Guide

2. Supply Connections
Connect the Filter Assembly
Turn on the water and flush water through the supply stops into
a bucket.
Turn off the water.
Remove the filter assemblies from supply hoses. Then thread a
filter assembly onto each supply stop.
Connect the Supplies
Connect the left supply hose to the filter assembly on the hot
supply stop.
Connect the right supply hose to the filter assembly on the cold
supply stop.
Tighten the connections with a small adjustable wrench.
Turn on the water and flush the faucet by activating it.
NOTE: For optimum performance, clean your filter screens
periodically. Refer to the Maintenance Guide.
Flex Hose
Filter
Assembly
Supply
Stop
Housing
Adapter
Screen
1124215-2-B 4 Kohler Co.