How to Guide

Product Information
Applicable products:
Quadrangle whirlpool with chromatherapy
lights
K-1360-H2
Quadrangle whirlpool less chromatherapy
lights
K-1360-H3
Fixture*:
Bathing well:
Basin area, bottom 46″ (1168 mm) x 34″ (864 mm)
Basin area, top 57″ (1448 mm) x 37″ (940 mm)
Weight 215 lbs (98 kg)
To overflow:
Water depth 20″ (508 mm)
Capacity 149 gal (564 L)
* Approximate measurements for comparison only.
Pump: (Qty. 2) V Hz A
Variable speed: 240 50/60 18
Included components:
Cut-out template 1000153-7
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control 220-240 V, 20 A, 50/60 Hz
Heater 220-240 V, 20 A, 50/60 Hz, 4 kW
Installation Notes
Install this product according to the installation guide.
Two separate 240 V electrical services required; one for the
pump/control, and another for the heater.
Floor support under whirlpool must provide for a minimum of
62 lbs/square foot (303 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck other
than that supplied.
Fixture conforms to CSA B45.5/IAPMO Z124. All dimensions
are nominal.
Ø 2"
32-3/4"
(832 mm)
10"
(254 mm)
2-3/4"
(70 mm)
45"(1143 mm)
11/16"
(17 mm)
1-1/4" (32 mm)
7" (178 mm)
2"
(51 mm)
11-1/2" (292 mm)
75" (1905 mm)
17-1/2" (445 mm)
3-1/2"
(89 mm)
3" (76 mm)
Drop-in cut-out 73-1/2" (1867 mm)
x 43-1/2" (1105 mm)
No change in measurements with drain
shown. (K-7167 or K-7167M)
21-5/8"
(549 mm)
Cold/Valve
(Supplied)
Hot/Valve
(Supplied)
3/4" (19 mm) D.
Supply To Valves
Valve Detail
Handshower
1-1/4" (32 mm)D. Hole
(Not Supplied)
Transfer Valve
(Supplied)
2-1/2"
(64 mm)
Pump/Control Access
45" (1143 mm) W x
18" (457 mm) H Min
25"
(635 mm)
3"
(76 mm)
K-1360-H3
Roughing-In
K-1360-H2,K-1360-H3
RIVERBATH
®
QUADRANGLE WHIRLPOOL
RIVERBATH
®
QUADRANGLE WHIRLPOOL
1022212-1-
E