Dimensions Guide

PURIST
18
1/2”-14
N.P.T.
TOP OF BATH
48” (121.9cm)
TO FLOOR
(SHOWER
ONLY)
10” (25.4cm)
TO SPOUT
(BATH ONLY)
1/2”-14
N.P.T.
35 REF
72” (182.9cm)-
78” (198.1cm)
TO FLOOR
(TYPICAL)
4” D.
(10.2cm)
4-7/16”
(11.3cm)
5-5/16”
(13.5cm)
3-1/2”
(8.9cm)
6-1/2” D.
(16.5cm)
10-5/8” (27cm)
5-1/2”
(14cm)
4” D.
(10.2cm)
35 BATH SPOUT
90 BATH SPOUT
CROSS
HANDLE
LEVER
HANDLE
7-3/4” (19.7cm)
7-3/4” (19.7cm)
Required Accessory
K-304-K Rite-Temp Valve Without Stops
NA
K-304-KS Rite-Temp Valve With Stops
NA
K-304-KP
Rite-Temp Valve With PVC
Connections
NA
K-305-K Rite-Temp Valve Without Stops
NA
K-305-KS Rite-Temp Valve With Stops
NA
K-306-KS HiFlow Rite-Temp Valve With Stops
NA
PRODUCT INFORMATION
WARNING: Risk of damage to the K-306-KS
valve assembly. When using the K-306-KS
valve in a fiberglass or acrylic installation, use
the thin wall installation kit (88526).
INSTALLATION NOTES
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Cap shower outlet if deck-mount spout, diverter, or
handshower is connected to spout outlet.
Install straight pipe or tube drop of 7” (17.8cm) to 18”
(45.7cm) with single elbow between valve and wall-mount
spout.
K-T14420, K-304, K-305, K-306 Purist Faucets
Page 2 of 2
1015599-4-A
PRODUCT DIAGRAM