Installation Guide

Instale la válvula remota
Deslice el empaque en el montaje de la válvula remota.
Desde arriba de la cubierta/borde: Inserte el montaje de la válvula remota a
través del orificio de fijación.
Desde abajo de la cubierta/borde: Deslice la placa en la válvula remota, luego
apriete con una llave las tres tuercas.
4. Complete the Installation
Connect the Plumbing
NOTE: The illustration shown is a suggested plumbing connection method. Actual
plumbing connections will vary by site.
Verify the spout and remote valve are properly positioned and secure.
Cut and assemble copper tubing to fit the installation.
Install a water hammer arrester near the inlet of the diverter valve.
Solder the connections.
Complete the handshower holder installation. Refer to the installation instructions
packed with the handshower holder.
Installation Checkout
With the supply stops in the closed position, turn on the main water supply.
Open the supply stops. Keep the remote valve closed.
Water Hammer Arrester
Anti coup de bélier
Amortiguador de golpes de ariete
Handle
Poignée
Manija
Remote Valve
Valve à distance
Válvula remota
Check for leaks.
Vérifier s'il y a des fuites.
Verifique que no haya fugas.
Kohler Co. 9 1110056-2-C