Full Product Manual

84 TP-7092 4/23
Figure 67 USB Port and Mini-Breaker Locations
5.5 Stop Switches
The generator set may be equipped with an optional emergency stop switch or an engine shutdown switch. Verify that it is safe
to start the generator set and apply power to the load before deactivating these switches. See the Remote Emergency Stop
Switch section.
5.6 Thermostat
WARNING
Accidental starting.
Can cause severe injury or death.
Disconnect the battery cables before working on the generator set. Remove the
negative (–) lead first when disconnecting the battery. Reconnect the negative (–)
lead last when reconnecting the battery.
Disabling the generator set. Accidental starting can cause severe injury or death. Before working on the generator set or
equipment connected to the set, disable the generator set as follows: (1) Press the generator set off/reset button to shut down
the generator set. (2) Disconnect the power to the battery charger, if equipped. (3) Remove the battery cables, negative (–) lead
first. Reconnect the negative (–) lead last when reconnecting the battery. Follow these precautions to prevent the starting of the
generator set by the remote start/stop switch.
WARNING
Hot engine and exhaust system.
Can cause severe injury or death.
Do not work on the generator set until it cools.
Servicing the exhaust system. Hot parts can cause severe injury or death. Do not touch hot engine parts. The engine and
exhaust system components become extremely hot during operation.
ADV-8928
Mini-breaker location (access through engine
compartment)
USB port on RDC2 controller