Installation Guide

TP-7091 2/2144 Section 5 Accessories
1
GM103794
1. Battery heater
2. Battery (not included in battery heater kit)
3. Power cord for 240 volt kits
2
3
Note: Adapter harness for multiple accessories not shown.
Figure 5-13 Battery Heater
5.7.2 Breather Tube and Oil Heater
The breather tube heater and oil heater kit is
recommended for improved cold starting in locations
where the ambient temperature drops below 0C
(32F).
Note: The heaters require a continuous source of AC
power. See Figure 5-14 and Figure 5-15 for the
power supply voltage required.
Note: The breather tube heater and oil heater must be
used together.
Verify that AC power is connected to the generator set
as described in the generator set Installation Manual.
The circuit must be backed up by the generator set to
provide power at all times. Refer to TT- 1709 for
instructions to install the heaters and connect 120VAC
power.
See Figure 5-16 and Figure 5-17 for illustrations of the
120VAC breather tube heater and oil heater.
Heater Part Number GM110893, GM110894
Voltage 120VAC
Thermostat ON
4C (40F)
Thermostat OFF
13C (55F)
Figure 5-14 Breather Tube Heater Specifications
Heater Part Number GM110895, GM110896
Voltage 120VAC
Thermostat ON
4C (40F)
Thermostat OFF
13C (55F)
Figure 5-15 Oil Heater Specifications
1. Heating element
2. Thermostat
3. 120 VAC female connector (connect to oil heater)
4. Label
5. 120 VAC plug
1
3
4
2
5
Figure 5-16 Breather Tube Heater