Installation Manual

1. Prepare the Valve
IMPORTANT! Secure the piping to the framing.
Install or relocate the water supplies as necessary.
A typical bath and shower installation is plumbed using 1/2″
copper tubing and adapters.
Use thread sealant on all threaded connections.
Temporarily install 1/2″ nipples to the bath and shower elbows,
extending at least 2″ (5.1 cm) beyond the finished wall.
Turn on the water supply and check for leaks.
Complete the finished wall.
72" (182.9 cm)
to Floor, Typical
Shower Ell
Temporary
Nipple
1/2" Male
Adapter
1/2" Piping
Spout Outlet
Kohler Co. 3 113280-2-AB