Installation Guide

8. Install the Bath Filler - Deck-Mount
Place a gasket and escutcheon over each coupling assembly.
Face the setscrew hole on each escutcheon toward the outside of
the bath.
Apply lubricant (supplied) to the O-rings on the coupling
assemblies.
Slide the arms of the bath filler over the coupling assemblies.
Secure the arms to the coupling assemblies with the large
setscrews.
Secure each escutcheon in place with a small setscrew.
Proceed to the ″Install the Handshower - All Installations″ section.
Bath Filler
Gasket
Escutcheon
Arm
Coupling
Assembly
Large Setscrews
Small Setscrew
Small Setscrew
Kohler Co. 13 1054455-2-E