Installation Guide

11. Installation Checkout
Ensure all connections are tight.
Using the key provided, remove the aerator from the spout.
Turn on the main water supply.
Tilt down and rotate the handle to the full hot position. Run hot
water for 1 minute to remove any debris.
Rotate the handle to the full cold position. Run cold water for 1
minute to remove any debris.
Check for leaks. Adjust as needed.
Lift the handshower out of the handshower bracket.
Push the diverter button to activate the handshower.
Check for leaks at each end of the handshower hose. Adjust as
needed.
Return the handle to a level position to turn the water off.
Place the handshower back into the handshower bracket.
Reinstall the aerator.
Care and Cleaning
For best results, keep the following in mind when caring for your
KOHLER product:
Handshower
Hose
Handshower
Handshower
Bracket
Diverter
Button
Handle
Key
Aerator
Spout
Kohler Co. 15 1219580-2-A