Dimensions Guide

1-1/8" (29 mm)
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
Shower backet must be mounted to a brace
between the wall studs.
The screws (provided) must be attached to
ceramic tile, cement board, or a brace between
the wall studs.
If mounting on ceramic tile, do not position the
screw locations of the shower basket on a grout
line.
Apply silicone sealant into the drilled holes before
securing the shower basket to the finished
surface. This will reduce the risk of water damage
behind the finished surface.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
12-1-2017 06:24
Small shower basket
K-1898