Installation Guide

Before You Begin (cont.)
IMPORTANT! For lavatory installations using the K-18598 vanity:
Review the K-18598 vanity installation guide to properly plan for
the lavatory installation.
IMPORTANT! For K-18691 installations: When selecting support
braces, ensure they will support a minimum of 69.1 lbs (31.34 kg)
load bearing.
NOTE: This installation guide includes instructions for a pedestal
installation or a vanity/countertop installation. Refer to applicable
sections in this guide for your installation.
Observe all local plumbing and building codes.
Ensure the walls and the floor are square, plumb, and level before
proceeding with the installation.
Install the faucet and drain to the lavatory before permanently
mounting the lavatory.
To properly secure the lavatory to the finished wall, use the
hanger bolts provided or select lag bolts according to your
finished wall thickness and rated with a minimum of 69.1 lbs
(31.34 kg) load bearing. The hanger bolts must extend a minimum
of 1-1/4″ (3.2 cm) beyond the finished wall.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
Kohler Co. 3 1052866-2-E