Dimensions Guide

Floor
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
FreestandingInstallation:
CenterDrain location:
Remote blower motor installation is required.
Relocation kit is included.
45-3/4" x 24-7/8" (1162 mm x 632 mm)Basin area, bottom:
54-7/8" x 29-3/16" (1394 mm x 741 mm)Basin area, top:
91 lbs (41.3 kg)Weight:
40.4 lbs/ft² (197.3 kg/m²)Minimum floor load:
16" (406 mm)Water depth:
72.6 gal (274.8 L)Water capacity:
Footprint, 1244408-7, not required, not
included
Template:
Blower: 120 V, 10 A, 60 Hz, 300 WElectrical component
rating:
0" (0 mm)Minimum flat for door:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
8-22-2016 02:08
Sunstruck
®
5.5' BubbleMassage Bath
K-1966-G