Installation Guide

TP-6804 2/1450 Section 3 RDC2 Controller Operation
3.20 Load Control Module (LCM)
Menus
The Load Control menu displays the status of the Load
Control Module (LCM) inputs and outputs, and allows a
test of the LCM output relays. This menu appears only if
an LCM is connected.
Generator current is displayed as a percent of the
maximum generator capacity. The load control module
adds and sheds loads based on the generator current.
The test function cycles the relays in the order of their
priority. For detailed information about the LCM
operation, refer to TT-1574, provided with the LCM kit.
Input 1:
In/Active
Output 1:
Add/Shed
Input 2:
In/Active
Output 2:
Add/Shed
Output 3:
Add/Shed
Output 4:
Add/Shed
Output 5:
Add/Shed
Output 6:
Add/Shed
Test Outputs
Push Select
(blinking)
<---- Return
tp6810
Load ---->
Control
Load ---->
Control 1
<---- Return
Generator
Current: 123 %
Figure 3-25 Load Control Module (LCM) Status Menu