How to Guide

Product Information
Applicable product:
Lavatory with overflow, with clamps K-2209
Lavatory with overflow, with clamps K-2210
Lavatory with glazed underside, without
overflow, with clamps
K-2210-G
Lavatory with overflow, without clamps K-2210-L
Lavatory without overflow K-2210-N
Lavatory with overflow, with clamps K-2211
Lavatory with glazed underside, without
overflow, with clamps
K-2211-G
Lavatory with overflow, without clamps K-2211-L
Fixture*: Basin area Water depth
K-2209 15″ (381 mm) x
12″ (305 mm)
4″
(102 mm)
K-2210/K-2210-L/
K-2210-N/K-2210-G
17″ (432 mm) x
14″ (356 mm)
4″
(102 mm)
K-2211/K-2211-G/
K-2211-L
19″ (483 mm) x
15″ (381 mm)
4″
(102 mm)
Drain hole 1-3/4″ (44 mm) D.
* Approximate measurements for comparison only.
Included components:
Basin clamp assembly (not included with
K-2210-L and K-2211-L)
52047
Cut-out template, K-2209 85838-7
Cut-out template, K-2210 1151011-7
Cut-out template, K-2211 1018997-7
Installation Notes
Install this product according to the installation guide.
Supplied basin clamp assemblies require 1″ (25 mm)
minimum countertop thickness. Installer must supply anchors
for thinner countertops.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All
dimensions are nominal.
Ø 3/8"
(10 mm)
5/8"
(16 mm)
Marble Installation
Wood Installation
Sealant
Recommended ADA Installation
3" (76 mm)
24" (610 mm)
L of Fitting
C
2-1/2" (64 mm)
1/2" (13 mm)
1-1/4" OD
3/8" Cold
3/8" Hot
4" (102 mm)
1-1/8" (29 mm)
(X)
(Y)
ADA Drain Outlet
10-3/4"
(273 mm)
1-1/2" (38 mm)
1" (25 mm) = K-2209
Standard Installation
K-2209: (X) = 14" (356 mm), (Y) = 17" (432 mm)
K-2210: (X) = 16-1/4" (413 mm), (Y) = 19-1/4" (489 mm)
K-2211: (X) = 17-1/4" (438 mm), (Y) = 21-1/4" (540 mm)
2-5/8" (67 mm)
5-1/8"
(130 mm)
7-1/2"
(191 mm)
13-1/8"
(333 mm)
14"
(356 mm)
11"
(279 mm)
9"
(229 mm)
Min
8"
(203 mm)
Min
27"
(686 mm)
Min
34"
(864 mm)
10-3/4"
(273 mm)
Roughing-In
K-2210, K-2211
CAXTON
®
UNDERCOUNTER LAVATORY
CAXTON
®
UNDERCOUNTER LAVATORY
105048-1-
FH