Install Manual

TP-6906 6/1428 Section 1 Installation Instructions
tp6809
PIM
LCM
RXT ATS
Generator Set
Notes:
D See Figure 1-10 for terminal block location on generator set. Check
the decal on the generator set for terminal block connections.
D See Figure 1-13 for maximum total cable length per run (3 runs with
1 module each shown).
D See Figure 1-14 for communication connection detail.
D Use splices or wire nuts to collect multiple leads for connection to the
generator set terminal block. See Figure 1-17.
Customer
Connection
Terminal Block
Figure 1-16 Accessory Module Connections (three cable runs with one module each)
Note: See Figure 1-13 for cable specifications.
1. Customer connection terminal block. See Figure 1-10 for location. Check the decal on the generator set for terminal block connections.
2. Splice
3. Connect all of the shield leads on this end to GROUND at the generator set.
2
tp6809
Generator Set
COM
PWR
B
A
3
COM
PWR
B
A
9402 CABLE
9402 CABLE
RBUS
12VDC
3
1
Figure 1-17 Multiple Connections to the Generator Set