Installation Guide

4. Install the Stone Top
Apply a 1/2″ (13 mm) bead of siliconized acrylic caulk in each
top corner of the bridge.
IMPORTANT! Ensure the finished side of the stone top is up when
installing.
Single Vanity Installations: Position the top so the back is flush
with the wall and the side is flush to the vanity; press into place.
Double Vanity Installations: Position the top so the back is flush
with the wall and the top is centered between the two vanities;
press into place.
Immediately wipe away any excess caulk.
Siliconized
Acrylic Caulk
Kohler Co. 7 1207227-2-A