Installation Guide

5. Remove/Reinstall the Drawer
Remove
Slide the drawer out until fully extended.
From underneath, pull the release latches toward the center of the
drawer.
Lift the front of the drawer and pull toward you to disengage
from the rails.
Once removed, lay the drawer on a flat, protective surface.
Reinstall
Fully extend the rails.
Align the holes in the back of the drawer with the rail hooks.
Rotate the drawer down onto the rails, engaging the front drawer
holes with the rail pins.
From underneath, push the release latches into the rails to secure
the drawer.
Install the Knob
From the inside of the drawer, insert the screw through the
predrilled hole.
Thread the knob onto the screw. Tighten securely.
Latch
Rail
Hook
Holes
Pin
Knob
Screw
1207227-2-A 8 Kohler Co.