Full Product Manual

TP-7092 4/23 59
3.18.1 Networking Status Submenu
The Networking Status submenu contains settings for OnCue
®
Plus. Changes to these settings are not typically required.
If DHCP is enabled, IP parameters are not displayed. If DHCP is disabled (i.e., if a static IP address is used), the IP parameters
are displayed.
To enable or disable DHCP and change the IP settings, go to the Networking Configuration menu.
Figure 47 Network Status Submenu
Networking- -->
Information
Networking- -->
Status
OnCue Status:
Connected
IP Address:
123.456.789.123
DHCP:
Enabled
Subnet Mask:
123.456.789.123
Gateway:
123.456.789.123
DNS 1:
123.456.789.123
DNS 2:
123.456.789.123
Ethernet Status:
Disconnected
OnCue Server:
123.456.789.123
<--- Return