Full Product Manual

52 TP-7092 4/23
3.11 Generator Metering Menu
The generator metering menu displays the generator voltage and frequency. See the figure titled: Generator Metering Menu.
DANGER
Hazardous voltage.
Will cause severe injury or death.
This equipment must be installed and serviced by qualified electrical personnel.
Voltage Calibration
The voltage calibration mode can be entered from the Generator Metering menu. Contact a Kohler-authorized dealer for service.
The Reset Calibration menu allows you to set the voltage reading back to the original value after calibration, if necessary.
See Figure 39.
Figure 39 Generator Metering Menu
Generator -->
Metering
Volts L1- L2:
240 V
Volts:
240 V
Reset
Calibration
Reset
Calib? No
Reset
Calib? Yes
<--- Return
tp6810
Note:
Actual settings may vary.
Frequency:
60.0 Hz
Frequency:
60.0 Hz
Volts L2- L3:
240 V
Volts L3- L1:
240 V
Three-phase
Single-phase