Full Product Manual

74 TP-7092 4/23
4.2.7 Oil Cooler (20RCA/L and 26RCA/L only)
Inspect and clean the oil cooler at the intervals indicated in the service schedule. The oil cooler must be kept free of debris.
See Figure 57 for the oil cooler location. The oil cooler is located under the No. 2 cylinder shroud. Remove the top mounting
screw and loosen the two side screws, then lift off the cylinder shroud.
Clean the outside of the oil cooler fins with a brush or with compressed air.
Figure 57 Oil Cooler
Oil cooler
62 590 01
Note:
See the
Oil Fill Components section for location.