How to Guide

Product Information
Applicable product:
8″ (20.3 cm) center K-2822-8
4″ (10.2 cm) center K-2822-4
Single-hole K-2822-1
Fixture*:
Basin area 15-3/8″ (39.1 cm) x 15-3/8″ (39.1 cm)
Water depth 6″ (15.2 cm)
Drain hole 1-3/4″ (4.4 cm) D.
* Approximate measurements for comparison only.
Holes K-2822-8 K-2822-4 K-2822-1
Spout 1-1/8″
(2.9 cm) D.
1-1/8″
(2.9 cm) D.
1-3/8″
(3.5 cm) D.
Faucet 1-3/8″
(3.5 cm) D.
1-3/16″
(3 cm) D.
NA
Included components:
Accessory pack 1003890
Required accessories:
Drain (non ADA applications) K-7702
Required accessories: cont.
P-Trap (ADA applications) K-9018
Offset drain (ADA applications) K-7131-A
Drain spacer gasket kit (ADA applications) 1019171
Recommended accessories:
Iron Works Historic
TM
Pedestal (not ADA
compliant)
K-2823-P
Iron Works Tellieur
TM
Table (not ADA
compliant)
K-3116
Installation Notes
Install this product according to the installation guide.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
WARNING: Risk of injury or product damage.
This cast iron lavatory is very heavy. Install only to
a reinforced stud structure constructed according
to the installation instructions.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
8"
(20.3 cm)
Min
(S)
4" (10.2 cm)
4" (10.2 cm)
4" (10.2 cm)
23"
(58.4 cm)
1/2"
(1.3 cm)
9-1/4" (23.5 cm)
4" (10.2 cm)
4-1/8"
(10.5 cm)
4-1/8"
(10.5 cm)
3/4"
(1.9 cm)
24" (61 cm)
1/2" (1.3 cm)
Anchor Slots
7-7/16"
(18.9 cm)
13-1/8"
(33.3 cm)
4-1/8"
(10.5 cm)
11-3/4"
(29.8 cm)
7-7/16" (18.9 cm)
11"
(27.9 cm)
34"
(86.4 cm)
23" (58.4 cm)
1-1/4" OD
3/8" Cold
3/8" Hot
9"
(22.9 cm)
Min
27"
(68.6 cm)
Min
3-1/2"
(8.9 cm)
Recommended ADA Installation
Standard Installation
K-2822-8
K-2822-1
K-2822-4
(S)
10" (25.4 cm)
14" (35.6 cm)
K-2822-1,
K-2822-4
K-2822-8
Roughing-In
K-2822
IRON WORKS
®
WALL-MOUNT LAVATORY
IRON WORKS
®
WALL-MOUNT LAVATORY
1003099-1-
G