How To Guide

Product Information
Applicable product:
K-2826 Self-rimming/Undercounter
lavatory
Accessories/hardware:
P-trap K-9018 Recommended
Fixture*: Basin area Water depth
Lavatory 23-3/4″ (60.3 cm) x
14-1/2″ (36.8 cm)
3-7/8″
(9.8 cm)
Drain hole 1-3/4″ (4.4 cm) D.
* Approximate measurements for comparison only.
Included components:
Basin clamp assembly 52047
Cut-out template 1053506-7
Installation Notes
Install this product according to the installation guide.
Supplied basin clamp assemblies require 1″ (2.5 cm)
minimum countertop thickness. Installer must supply anchors
for thinner countertops.
NOTICE: The countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by the Kohler Co. (Call 1-800-4-KOHLER.) Kohler
Co. is not responsible for cut-out errors when the incorrect
cut-out template is used.
Fixture dimensions are nominal and conform to tolerances in
ASME Standard A112.19.1M.
7/16" (1.1 cm)
3/8"
(1 cm)
5-7/8" (14.9 cm)
15-5/8"
(39.7 cm)
7-13/16"
(19.8 cm)
2-1/2"
(6.4 cm)
1-1/4"
OD
3/8" Cold
3/8" Hot
4"
(10.2 cm)
24-3/4" (62.9 cm)
34"
(86.4 cm)
3-1/4"
(8.3 cm)
27"
(68.6 cm)
Min
8"
(20.3 cm)
Min
9"
(22.9 cm)
Min
11"
(27.9 cm)
Recommended ADA Installation
24" (61 cm)
Sealant
Marble Installation
Wood Installation
Sealant
3/8" (1 cm) D.
5/8" (1.6 cm)
12-7/8"
(32.7 cm)
14"
(35.6 cm)
C
L of Fitting
Roughing-In
K-2826
IRON/TONES
TM
SELF-RIMMING/UNDERCOUNTER LAVATORY
IRON/TONESTM SELF-RIMMING/UNDERCOUNTER LAVATORY
1052993-1-
B