How To Guide

Product Information
Applicable product:
Single-hole self-rimming lavatory K-2831-1
4″ (10.2 cm) centers self-rimming
lavatory
K-2831-4
8″ (20.3 cm) centers self-rimming
lavatory
K-2831-8
Fixture*:
Basin area 21-3/16″ (53.8 cm) x
11-5/16″ (28.7 cm)
Water depth 4-1/2″ (11.4 cm)
Drain hole 1-3/4″ (4.4 cm) D.
* Approximate measurements for comparison only.
Holes K-2831-8 K-2831-4 K-2831-1
Spout 1-3/16″
(3 cm) D.
1-3/16″
(3 cm) D.
1-3/8″
(3.5 cm) D.
Faucet 1-3/8″
(3.5 cm) D.
1-3/16″
(3 cm) D.
Included components:
Cut-out template 1046628-7
Installation Notes
Install this product according to the installation guide.
Product does not have an overflow.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cutout errors when the incorrect cut-out
template is used.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2 All
dimensions are nominal.
K-2831-4
K-2831-8
Standard Installation
K-2831-1
17-1/4"
(43.8 cm)
8-3/4"
(22.2 cm)
2-3/4"
(7.1 cm)
6-1/2"
(16.5 cm)
3/8" (1 cm)
8"
(20.3 cm)
Min
11"
(27.9 cm)
9"
(22.9 cm)
Min
27"
(68.6 cm)
Min
34"
(86.4 cm)
1-1/2"
(3.8 cm)
24" (61 cm)
Recommended ADA Installation
4" (10.2 cm)
2-3/4"
(7.1 cm)
2-3/4"
(7.1 cm)
4" (10.2 cm)
14-3/8"
(36.5 cm)
12-3/8"
(31.4 cm)
22-1/8" (56.2 cm)
4" (10.2 cm)
3/8" Cold
3/8" Hot
1-1/4" OD
Roughing-In
K-2831
MARATEA
®
SELF-RIMMING LAVATORY
MARATEA
®
SELF-RIMMING LAVATORY
1044943-1-
C