How To Guide

Product Information
Applicable product:
Wading Pool lavatory K-2833
Fixture*:
Basin area 16-1/2″ (41.9 cm)
x 13-3/4″ (34.9 cm)
Water depth 5″ (12.7 cm)
Drain hole 1-3/4″ (4.4 cm) D.
* Approximate measurements for comparison only.
Included component:
Cut-out template 1046630-7
Installation Notes
Install this product according to the installation guide.
Product does not have overflow.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cutout errors when the incorrect cut-out
template is used.
The spout must be a minimum of 5″ (12.7 cm) long for
adequate clearance into the lavatory when installed with the
centerline, as shown.
The spout must be tall enough to clear the 1-11/16″ (4.3 cm)
rim height and provide a 1″ (2.5 cm) air gap per ASME
A112.1.2.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
3/8" Hot
3/8" Cold
1-1/4" OD
24" (61 cm)
4" (10.2 cm)
18-1/4" (46.4 cm)
L Of Fitting
C
Recommended ADA
Installation
9-3/4"
(24.8 cm)
14"
(35.6 cm)
12-3/8"
(31.4 cm)
1-1/2"
(3.8 cm)
1-11/16"
(4.3 cm)
10"
(25.4 cm)
7"
(17.8 cm)
7-13/16"
(19.8 cm)
15-5/8"
(39.7 cm)
9" (22.9 cm)
Min
8" (20.3 cm)
Min
27"
(68.6 cm)
Min
11"
(27.9 cm)
34"
(86.4 cm)
1-7/8"
(4.8 cm)
16-1/2"
(41.9 cm)
Roughing-In
K-2833
DEMILAV
®
WADING POOL
®
LAVATORY
DEMILAV
®
WADING POOL
®
LAVATORY
1044945-1-
E