Specification

Technical Information
Fixture:*
Basin area 18-1/16″ (459 mm) x 10-3/16″
(259 mm)
Basin depth 7-1/2″ (191 mm)
Drain hole Ø 1-5/8″ (41 mm)
* Approximate measurements for comparison only.
Holes K-2839-8 K-2839-4 K-2839-1
Spout Ø 1-3/8″
(35 mm)
Ø 1-3/8″
(35 mm)
Ø 1-3/8″
(35 mm)
Faucet Ø 1-3/8″
(35 mm)
Ø 1-3/8″
(35 mm)
Included components:
Cut-out template 1147017-7
Installation Notes
Install this product according to the installation guide.
Will comply with ADA when installed per section 606
Lavatories of the Act.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
Spout must be 5″ (127 mm) long (min) for adequate
clearance into the bathroom sink when installed with the
centerline as shown.
Spout must be tall enough to clear 3″ (76 mm) rim height and
provide a 1″ (25 mm) air gap per ASME A112.1.1.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for the cut-out errors when the incorrect
cut-out template is used.
8"
(203 mm)
Min
3-5/16"
(84 mm)
9"
(229 mm)
Min
11"
(279 mm)
27"
(686 mm)
Min
34"
(864 mm)
24" (610 mm)
Recommended ADA Installation
8-1/2"
(216 mm)
3-11/16"
(94 mm)
17"
(432 mm)
20" (508 mm)
10" (254 mm)
9-5/16"
(237 mm)
2" (51 mm)
4" (102 mm)
3-11/16"
(94 mm)
3-11/16"
(94 mm)
4" (102 mm)
15-9/16"
(395 mm)
14"
(356 mm)
3/8" Hot
3/8" Cold
1-1/4" OD
K-2839-1
K-2839-4
K-2839-8
1-1/8"
(29 mm)
Product Diagram
TIDES
®
TIDES
®
DROP-IN BATHROOM SINK
Page2of2
1154760-4-
E