Installation Guide

114409-2-CB

Kohler Co., Kohler WI3

 marble or solid surface countertops upside down on

foam padding. Drill 3/8” diameter holes, 5/8” deep in the

locations shown. Set the lead anchors into the holes using

a setting tool. Tap the setting tool with a hammer to set the

lead anchors into position.

NOTE: The insert must be properly installed to ensure

proper fit.

NOTE: For wood countertops, pre-drill the holes for wood

screws in the locations shown. Waterproof any

unprotected areas of wood.

          

        

      

       

            

        

 

SEALANT

3/8” D.

5/8”

LAVATORY

MARBLE SLAB

INSTALLATION

WOOD COUNTER

INSTALLATION

LAVATORY

SEALANT

Fig. #5

Follow the instructions listed on the sealant label. Allow

the sealant to set for 30 minutes or longer. Connect the

drain fittings and faucet supply fittings. Turn on the water,

and check for leaks at all the connections.

Fig. #6

PARTS INFORMATION

ITEM PART

NO. NO. DESCRIPTION

1 44596 Insert

2 44597 Clip

3 68918 Screw

4 44598 Screw