How to Guide

Product Information
Applicable product:
4-hole sink K-3258-4 shown
3-hole sink K-3258-3 shown
Single-hole sink K-3258-1 shown
Fixture*:
Basin area 21-1/4″ (54 cm) x 15-3/4″ (40 cm)
Water depth 8″ (20.3 cm)
Drain hole 3-5/8″ (9.2 cm) D.
Faucet holes 1-7/16″ (3.7 cm) D.
*Approximate measurements for comparison only.
Included components:
Fastener pack 1023180
Installation Notes
Install this product according to the installation guide.
Cutout is 24-1/2″ (62.2 cm) x 21-1/2″ (54.6 cm) with
1/2″ (1.3 cm) radius corners.
Fixture dimensions are nominal and conform to tolerances in
ASME Standard A112.19.3.
1-3/4" (4.4 cm)
25" (63.5 cm)
1-1/2" OD
4" (10.2 cm)
4" (10.2 cm)
K-3258-4
K-3258-3
K-3258-1
1/4" (6 mm)
12-1/2"
(31.8 cm)
12-1/2"
(31.8 cm)
12-1/2"
(31.8 cm)
4-3/8"
(11.1 cm)
4-3/8"
(11.1 cm)
4-3/8"
(11.1 cm)
9-3/8"
(23.8 cm)
22"
(55.9 cm)
1-3/4"
(4.4 cm)
1-3/4"
(4.4 cm)
14-5/8"
(37.1 cm)
8-1/4"
(21 cm)
1-7/8"
(4.8 cm)
Roughing-In
K-3258
BALLAD
SELF-RIMMING KITCHEN SINK
BALLAD SELF-RIMMING KITCHEN SINK
114573-1-
BC