Installation Guide

1. Prepare the Site
Determine the installation location of the spout and install the
support framing as required.
When installing a spout with a diverter, install a 3/4″ (or 1/2″)
temporary nipple, extending a minimum of 2″ (5.1 cm) beyond
the finished wall.
When installing a non-diverter spout, install a 1/2″ temporary
nipple extending a minimum 2″ (5.1 cm) beyond the finished
wall.
Securely fasten the bath members to the framing.
Turn on the water and check for leaks. Repair as required.
Pipe or
Tubing
Optional
Adapter
for Copper
Tubing
Ell
Kohler Co. 3 112562-2-BB