Installation Guide

Tools and Materials
Before You Begin
CAUTION: Risk of personal injury. This product is not
designed or intended for use as a grab or support bar. Do not
install in a location where this product may be inadvertently
used as a grab or support bar.
Please read all instructions before you begin.
Observe all local plumbing and building codes.
Shut off the water supply.
Inspect the waste and supply tubing and replace as needed.
Install or relocate the water supplies as necessary to conform to
the roughing-in dimensions for your installation.
Use thread sealant on all the threaded connections.
This faucet can be installed in freestanding, deck-mount or wall
mount configurations. Follow only the instructions that apply to
your installation.
An optional wall-mount bracket is available to adapt the
handshower to a stationary location.
Plus:
• Adjustable Arc Pliers
• 1/2" Piping
• Threaded 1/2" Adapters
• 1/2" Union Elbows
• Bath Shower Ells
• K-6525 Wall-Mount Bracket
Propane
Torch
Hex
Wrenches
Thread
Sealant
Strap
Wrench
Solder
1008209-2-H 2 Kohler Co.