Installation Guide

4. Wall-Mount Supply Installation
Determine the faucet installation location.
Install support framing at the installation location as shown.
Secure the piping to the framing.
Install temporary plugs in the supply ells.
Turn on the water supplies and check for leaks.
Turn off the water supplies.
Complete the finished wall.
In the finished wall, drill two 1″ (25 mm) holes measuring 8″
(203 mm) apart from the center of each hole.
Drill a 1/2″ (13 mm) hole at the exact location illustrated. This
hole must be through the plywood support.
Remove the temporary plugs from the water supply ells.
11-3/8"
(289 mm)
Support
Framing
1/2" Copper
Tubing
Minimum 1/2"
Plywood
Ø 1" (25 mm)
Ø 1/2"
(13 mm)
Supply
Ells
This hole must be centered, and
must be through plywood support.
11-3/8"
(289 mm)
8" (203 mm)
Kohler Co. 7 1008209-2-H