Specification

Seagrove
™
by Studio McGee
36" bathroom vanity cabinet with sink and quartz top
K-35026
22-15/16"
(583 mm)
34-5/16"
(872 mm)
19"
(483 mm)
4"
(102 mm)
8-5/8"
(219 mm)
8-11/16"
(221 mm)
33-5/8"
(854 mm)
General
Rough-In
Area
18-1/2"
(470 mm)
22-7/16"
(570 mm)
37" (940 mm)
4"
(102 mm)
100°
1-3/16"
(30 mm)
19-1/2"
(495 mm)
39-11/16"
(1008 mm)
2-1/2"
(64 mm)
Door
4-3/4"
(121 mm)
10-1/2"
(267 mm)
Required Electrical Service
One circuit required.
Outlet: 120 V, 12 A, 60 Hz
Technical Information
All product dimensions are nominal.
Electrical component
rating:
Outlet: 120 V, 12 A, 60 Hz
Notes
Install this product according to the installation
instructions.
Select the type of fastener based upon the wall
material. Two 250 lb (113.4 kg) minimum load
bearing fasteners are recommended with a lag
bolt of length to clear obstacles in the wall and
5/16" washers. Calculate the proper lag bolt
length by adding the 1-1/2" (38 mm) backing
material, plus the wallboard thickness, plus the
back rail thickness.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada
7-9-2024 23:44 - US