Dimensions Guide

8-1/2" (216 mm) Min
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
Two-pieceToilet type:
IMPORTANT! The rough-in must be 12" (305
mm) or more from the base of the wall or
Elongated frontBowl shape:
2" (51 mm)Trap passageway:
baseboard. The base of the toilet fits tightly
against the wall or baseboard. The toilet will not
Water Consumption
1.6 gpf (6 lpf)Full:
fit correctly if there is less than 12" (305 mm) of
clear space between the base of the wall or
1 gpf (3.8 lpf)Reduced:
baseboard and the centerline of the outlet. Install
4-1/2" x 5-3/4" (114 mm x 146 mm)Water surface size:
or relocate the supply and outlet as necessary to
conform to rough-in dimensions.
8-1/2" (216 mm)Rim to water surface:
12" (305 mm)Rough-in:
NOTE: If a baseboard causes the rough-in to be
less than 12" (305 mm), it must be cut or removed
to allow space for the toilet.
5-1/2" (140 mm)Seat-mounting holes:
If this toilet is installed in new construction, install
a new supply stop following the dimensions in
the diagram.
In installations with the supply stop installed, the
existing supply stop may need to be relocated if
it is less than 8-1/2" (216 mm) from the centerline
of the toilet. Dry fit the toilet to confirm if the
supply stop needs to be relocated.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
6-24-2016 04:34
Persuade
®
Dual Flush Toilet
K-3654