Use and Care Guide

Product Information
Applicable product:
Comfort Height toilet – Classic design,
left-hand trip lever
K-3812
Comfort Height toilet – Classic design,
right-hand trip lever
K-3812-RA
Comfort Height toilet – Stately design,
left-hand trip lever
K-3813
Comfort Height toilet – Stately design,
right-hand trip lever
K-3813-RA
Fixture:
Configuration one-piece, elongated
Water per flush 1.28 gal (4.8 L)
Passageway 2-1/8″ (54 mm)
Water area 11″ (279 mm) x
8-3/4″ (222 mm)
Water depth from rim 6″ (152 mm)
Seat post hole centers 5-1/2″ (140 mm)
Included components:
Tank cover – Classic design OR 88871
Tank cover – Stately design 88872
Trip lever – left-hand OR K-9167-L
Trip lever – right-hand K-9167-R
Toilet seat K-4733
Tank accessory pack 52265
Bolt cap accessory pack 52048
Installation Notes
Install this product according to the installation guide.
Will comply with the American Disabilities Act (ADA) when
installed per the requirements of the Accessibility Guidelines,
Section 604 Water Closets, of the Act. The Model Plumbing
Codes require the installation of elongated open-front toilet
seats in public bathrooms.
Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All
dimensions are nominal.
Will comply with CSA B651 when installed per Clause 4.3.6
of the standard.
Will comply with OBC Barrier Free requirements when
installed per Clause 3.8.3.8 and 3.8.3.9.
Front of Bowl
K-3813
18-1/4" (464 mm)
K-3812
17-3/4" (451 mm)
K-3812
28-5/8" (727 mm)
K-3813
28-1/2" (724 mm)
16-1/4"
(413 mm)
1-7/8"
(48 mm)
28-1/8" (714 mm)
5/8"
(16 mm)
3-1/4"
(83 mm)
12" (305 mm)
Min
5-1/8"
(130 mm)
3/8" NPT
Supply
10"
(254 mm)
9-1/2"
(241 mm)
14-1/4"
(362 mm)
C
L of Outlet
5"
(127 mm)
7-1/4" (184 mm)
7-3/8" (187 mm)
Roughing-In
K-3812, K-3813
MEMOIRS
®
COMFORT HEIGHT
®
TOILET
MEMOIRS
®
COMFORT HEIGHT
®
TOILET
1156364-1-
C