Dimensions Guide

Features

•

Brass construction.

•

Bath-mount or deck-mount installation options.

•

Integral dual check valves for backflow prevention.

•

Two-or three-way configuration options.

•

For use with KOHLER

non-diverter bath spouts.

Codes/Standards

ASME A112.18.1/CSA B125.1

KOHLER

Faucet Lifetime Limited

Warranty

See website for detailed warranty information.

USA/Canada: 1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

7-28-2017 05:28

Bath-mount Transfer Valve

K-408-K

PAGE 1
Bath-mount Transfer Valve K-408-K Features • • • • • Brass construction. Bath-mount or deck-mount installation options. Integral dual check valves for backflow prevention. Two-or three-way configuration options. For use with KOHLER® non-diverter bath spouts. Codes/Standards ASME A112.18.1/CSA B125.1 KOHLER® Faucet Lifetime Limited Warranty See website for detailed warranty information. USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co.
PAGE 2
Bath-mount Transfer Valve K-408-K Bath Outlet Port Technical Information All product dimensions are nominal. Notes Bath and handshower outlets required for two-way transfer valve. Bath, handshower, and auxiliary outlets required for three-way transfer valve. When used as a two-way transfer valve (bath and handshower), the installer must cap the auxiliary outlet. Do not install spouts with flow restrictors or shower units on the bath outlet.